Available Rental Guns

MGM Baby Desert Eagle II 9mm 4.52 Inch Barrel Black Oxide Finish Polymer Frame 15 Round

 

Double action/single action. Black textured polymer frame and carbon steel slide with a black oxide finish. Slide mounted decocking safety with dual levers. Fixed combat sights with three white dots and a snag free fixed rear sight. Six right hand grooves. Three inch trigger reach. Includes two magazines.

 

BER Model 92FS 9mm Double/Single Action 4.9 Inch Barrel Bruniton Matte Black Finish Plastic Grips Three Dot Sights 15 Round Made In Italy.

Double/single action, external ambidextrous manual safety, decocking lever, trigger bar disconnect, rotating firing pin striker, firing pin block device. Lightweight, forged frame made form aircraft-quality aluminum alloy. Front and back of grip are grooved. The chamber loaded indicator is visible or can be felt by touch. White 3-Dot sights.

BERETTA Model APX 9mm 4.25 Inch Barrel 3-Dot Sights Accessory Rail Black Finish 17 Round

Full size polymer and metallic framed semi-automatic with striker-fired operating system. Removable, serialized chassis frame. Ambidextrous slide stop; magazine release button can be easily reversed. Short reset trigger set at six pounds. Equipped with 3-dot sight system; mil-std 1913 picatinny rail; automatic striker block safety. Full length slide serrations. Squared trigger guard. Grip width: 1.2 inches. Unloaded weight: 26.8 ounces. Made in Italy.

 

Beretta  ARX100 5.56mm/.223 Remington 16 Inch Barrel Ambidextrous Controls Telescoping Folding Stock 30 Round

 

Cold hammer forged barrel can be removed and replaced with various lengths and calibers in a matter of seconds. Case ejection can be switched from right to left with the simple push of a button. All of the critical controls are completely ambidextrous. With a constant contact pistol system the ARX100 can easily feed and fire under the most unforgiving conditions. Lightweight technopolymer receiver allows for reliable operation with virtually no lubricant. No pins and can be completely disassembled with no tools at all. Accepts standard AR magazines. Removeable back up sights. Telescopic folding stock. Full length picatinny rail. Ambidextrous safety selector and magazine release.

 

BER CX4 Storm PX4 Carbine 9mm 16.6 Inch Barrel 17 Round With Picatinny Rail

CX4 Storm PX4 Carbine

Front sight is fully adjustable for windage and elevation. Rear sight has two apertures for long land short range use. Both may be folded down when optics are used. Mounted Picatinny Rail. Semiautomatic straight blowback operation. Reversible controls. Bolt release lever. Rubber cheek piece. Adjustable stock. Chrome lined Hammer forged barrel. Technopolymer frame. Single action trigger. Removable magazine (same magazine as the PX4 Storm).

 

 

Beretta Model PX4 Storm Compact 9mm 3.2 Inch Barrel Black Finish Rail 15 Round

 

Rotary barrel design of the larger pistol but with a shorter and proportioned slide and grip. External spurred hammer. Frame of the Px4 Storm has an integral Picatinny MIL-STD-1913 rail for rapid attachment of tactical lights and laser aiming devices. Ambidextrous slide stop lever. Will accept the full size magazines.

 

 

New for 2017 - Boasts a high strength/lightweight composite compact-size frame at 85% of the original 1911, machined steel slide, target crown, fixed combat sights, eight round magazine, extended ambidextrous manual safety, and skeletonized hammer.
Size Matters. The Browning 1911-380 combines two of John M. Browning's most lasting innovations - the Model 1911 and the 380 ACP cartridge - into a modern, lightweight pistol. Unlike most of the modern "pocket pistols" that chamber the snappy 380 ACP cartridge, the 1911-380 is slightly larger to better manage recoil for improved control that makes follow-up shots faster and more accurate. The longer barrel increases bullet velocity for more downrange punch and improved acccuracy. The grip is compact, yet is long and wide enough to allow the shooting hand full purchase for added shooting comfort.

  • FRAME – Composite; Fully machined 7075 aluminum sub-frame and slide rails
  • SLIDE – Blackened stainless steel; Matte black finish
  • BARREL – Rust-resistant; Target crown
  • ACTION – Locked-breech action; Single action trigger
  • GRIPS – Composite panels
  • FEATURES – Fixed combat sights; Eight round magazine; Extended ambidextrous manual thumb safety; Extended slide release; Beavertail grip safety; Commander hammer; ABS carry case included

 

Browning Buck Mark Hunter .22 Long Rifle 6.5 Inch Heavy Bull Barrel Matte Stainless Finish 10 Round

 

Alloy receiver. Heavy tapered round bull barrel with matte stainless steel finish. Integral scope base. Blowback. Single-action trigger. Cocobolo target grips. Adjustable Pro-Target rear sight. Truglo/Marble's fiber optic front sight.

 

 

 

Browning Hi Power Standard 9mm 4.625 Inch Barrel Polished Blue Finish Fixed Sights Walnut Grips 10 Round

 

John Browning's last semi-automatic pistol design. Official military or police sidearm in over 68 countries. Single action, ambidextrous thumb safety and external hammer. Solid front slide. Push button magazine release.

 

Century Arms Red Army RAS47 Magpul American 7.62x39mm 16.5 Inch Threaded Barrel With Sights Black Nitride Finish Magpul MOE AK Stock/Pistol Grip/Handguard 30 Round. One hundred percent American made. 1/16 inch stamped 4140 steel nitride treated receiver; chrome moly 4150 nitride treated barrel with 1:10 inch twist; concentric LH 14x1 metric threads. AK side scope rail. RAK-1 Enhanced Trigger Group. Larger T-shaped magazine catch. Compatible with AKM furniture. Standard AKM sights. Retaining plate. Bolt hold-open notch on the safety selector. Slant brake. Bolt carrier tail is heat treated. Accepts all standard AK magazines. Includes Magpul MOE AK stock, pistol grip and handguard. Overall length: 35.25 inches. Weight: 7.65 pounds.

The Colt 1911 Series is a direct descendant of the original Colt  M1911. A long trigger, flat mainspring housing and original style recoil spring system remain from the original M1911 design. Upgrades from the original include white dot sights and a lowered ejection port for extra reliability. It still remains “the standard” that everyone tries to imitate, but no one duplicates.
 
Features:
·      High Profile Sights with Dots
·      Spur Hammer
·      Standard Safety Lock
·      Standard Grip Safety
·      Solid Aluminum Trigger
·      Lowered Ejection Port

COLT Model LE6920 MP-OD 5.56x45mm NATO/.223 Remington 16.1 Inch Barrel with Matte Black Finish Olive Drab Magpul MOE Furniture 30 Round

 

Flat top receiver. Olive Drab Magpul MOE furniture. Bayonet lug and flash hider. Chromed bore with 6 grooves and 1:7 inch right hand twist. Front sight: adjustable post for elevation. Magpul Gen2 back-up rear sight. Direct gas system, locking bolt.

 

The Compact Colts are ideal for Personal Protection. The Colt .380 Mustang Pocketlite and new Mustang Lite are small, lightweight and boast enhanced durability, reliability and accuracy, making either an ideal handgun for personal protection. The precise machining process, use of high quality materials and improvements in design make Colt’s new .380 Mustang Pocketlite and Mustang Lite two of the most consistent and reliable firearms on the market. The stainless steel slide and barrel are CNC machines from solid bar stock for precise tolerances. With loaded magazines, each of the handguns weight less than one pound. They both measure 5.5 inches long and have a 2.75-inch barrel. The minimal weight and length of these guns, combined with the short single action trigger, grip designs, frame designs and firing pin safety block make these firearms ideal for personal protection.
 
PRODUCT FEATURES:

  • The Colt Mustang® Pistol is ideal for personal protection and concealment
  • John Browning inspired design retains 1911 ergonomics
  • Modern re-engineered format retains the lightweight design of the Original Mustang® Pocketlite but with enhanced reliability
  •  Thumb safety design allows the shooter to unload the pistol while the safety is still engaged

The Compact Colts are ideal for Personal Protection. The Colt .380 Mustang Pocketlite and new Mustang Lite are small, lightweight and boast enhanced durability, reliability and accuracy, making either an ideal handgun for personal protection. The precise machining process, use of high quality materials and improvements in design make Colt’s new .380 Mustang Pocketlite and Mustang Lite two of the most consistent and reliable firearms on the market. The stainless steel slide and barrel are CNC machines from solid bar stock for precise tolerances. With loaded magazines, each of the handguns weight less than one pound. They both measure 5.5 inches long and have a 2.75-inch barrel. The minimal weight and length of these guns, combined with the short single action trigger, grip designs, frame designs and firing pin safety block make these firearms ideal for personal protection.
 
PRODUCT FEATURES:

  • The Colt Mustang® Pistol is ideal for personal protection and concealment
  • John Browning inspired design retains 1911 ergonomics
  • Modern re-engineered format retains the lightweight design of the Original Mustang® Pocketlite but with enhanced reliability
  • Thumb safety design allows the shooter to unload the pistol while the safety is still engaged

 

CZ - USA CZ 75 Compact 9mm Luger 3.7 Inch Barrel Black Polycoat Finish 14 Round

 

Reduced size version of original CZ75. Double action/single action. Steel frame; hammer forged barrel. Dual slide serrations. Squared trigger guard; lanyard loop. Checkered plastic grips; serrated front and back strap. Fixed sights. Manual safety. Firing pin block.

 

 

Dan Wesson Razorback RZ-45 Heritage .45 Auto 5 Inch Barrel Stainless Steel Finish Fixed Night Sights 8 Round

 

Razorback gets it s name from the serrated Clark style target rib machined on the top of the slide. Continuing in our Razorback series is the new Heritage in .45 ACP. Features a Tritium front sight with white target ring for increased visibility day or night, and a GI style guide rod. Manual thumb safety, grip safety. Single action.

 

FNH USA FNS .40 Smith & Wesson 4 Inch Barrel Fixed 3-Dot Sights Matte Silver Slide/Black Frame 14 Rounds

 

Striker-fired, double action with external extractor with loaded chamber indicator. Front and rear cocking serrations. Cold hammer-forged stainless steel barrel. Polished chamber and feed ramp. Polymer frame with replaceable steel frame/slide rails. Two interchangeable backstraps with lanyard eyelets. Mil-Std 1913 accessory mounting rail. Serrated trigger guard. Fully ambidextrous safety lever, slide stop lever and magazine release. Magazine features polished body, low-friction follower and polymer base.

 

 

FNH, USA FNS-9 9mm 4 Inch Barrel Fixed 3-Dot Sights Matte Silver Slide/Black Frame 17 Rounds

 

Striker-fired, double action with external extractor with loaded chamber indicator. Front and rear cocking serrations. Cold hammer-forged stainless steel barrel. Polished chamber and feed ramp. Polymer frame with replaceable steel frame/slide rails. Two interchangeable backstraps with lanyard eyelets. Mil-Std 1913 accessory mounting rail. Serrated trigger guard. Fully ambidextrous safety lever, slide stop lever and magazine release. Magazine features polished body, low-friction follower and polymer base.

 

 

FNH FNX-40 Double Action/Single Action .40 Smith & Wesson 4 Inch Barrel Black Finish Stainless Steel Slide Combat Sights 14 Round

 

Ergonomic polymer frame has a low bore axis for less felt recoil and improved control. Grip panels are checkered and ribbed for comfortable, no-snag carry. Four interchangeable backstrap inserts quickly adapt to your hand size. Profiled stainless steel slide has cocking serrations front and rear. Four inch hammer-forged stainless steel barrel. Ambidextrous operating controls. Double action/single action operation. Made in the USA.

 

FNH FNX-9 Double Action/Single Action 9mm 4 Inch Barrel Black Finish Stainless Steel Slide Combat Sights 17 Round

FNX-9 Double Action / Single Action

Ergonomic polymer frame has a low bore axis for less felt recoil and improved control. Grip panels are checkered and ribbed for comfortable, no-snag carry. Two interchangeable backstrap inserts quickly adapt to your hand size. Profiled stainless steel slide has cocking serrations front and rear. Four inch hammer-forged stainless steel barrel. Ambidextrous operating controls. Double action/single action. Made in the USA.

 

With Combat Sights

Newly designed fixed three-dot combat sights with Deep-V rear notch.

 

FNH SCAR 16S .223 Remington/5.56x45mm NATO 16.25 Inch Hard Chromed Barrel Side-Folding Polymer Stock Flat Dark Earth Finish 30 Round Detachable Box Magazine

 

SCAR 16S is chambered in 5.56x45mm NATO (223 Rem.) cartridge. Innovative gas-operated, short stroke piston system reduces fouling for greater reliability. SCAR features user-interchangeable, free floating, cold hammer-forged MIL-SPEC barrel with hard-chromed bored. Fully ambidextrous operating controls. Receiver-integrated MIL-STD 1913 optical rail plus three accessory rails enable mounting of a variety of tactical lights and lasers. Side-folding polymer stock is fully adjustable for comb height and length of pull.

 

Glock 42 Subcompact .380 Auto 3.25 Inch Barrel Black 6 Round

 

Slimline subcompact pistol engineered with the Glock Perfection promise and able to withstand the rigors of routine training. Made in the USA, the G42 is the smallest pistol Glock has ever introduced, making it ideal for pocket carry and shooters with smaller hands.

 

 

Glock 43 9mm Single Stack 3.39 Inch Barrel Fixed Sights Black 6 Round

 

Single stack 9mm for backup and concealed carry. Measures 6.2-inches long, 4.25 inches tall and just 1-inch wide, weighing only 18 ounces with an empty magazine. 5.5 pound trigger pull. Fixed sights. Barrel profile: right hand hexagonal twist. Size-wise the 43 fits in between the 42 and the subcompact 26.

 

 

GLK Gen4 Glock 17 9mm Luger 4.49 Inch Barrel Tenifer Finish Fixed Sights 17 Round

Glock 17 Gen4

Features interchangeable backstrap, revisable magazine catch and Dual recoil spring. Safe Action trigger system with three safeties. Right hand, hexagonal barrel rifling. Tenifer surface treatment process for barrel and slide.

 

Fixed Sights

 

 

GLK Gen4 Glock 19 9mm 4 Inch Barrel Tenifer Finish Fixed Sights 15 Round

Glock 19 Gen4

Features fixed sights, interchangeable backstrap, revisable magazine catch and Dual recoil spring. Safe Action trigger system with three safeties. Right hand, hexagonal barrel rifling. Tenifer surface treatment process for barrel and slide.

 

GLOCK INC Gen 4

Glock PG2050203 G20 Gen 4 10mm 4.6" 15+1 FS Modular Backstrap Blk

The Glock 20, in 10mm Auto, provides nothing short of massive firepower to
be your reliable companion on every hunt. The use of Glock hi-tech polymer
considerably reduces felt recoil. The modular backstrap design lets the
user adapt the grip to hand size, and the frame surface exhibits the
scientifically-designed Gen4 rough textured technology. The Generation 4
frame retains the Glock accessory rail for accessory attachment.

GLK Glock 21 Gen4 .45 Auto 4.6 Inch Barrel Black Finish Fixed Sights 13 Round

Glock 21 Gen4

Rough textured finish, interchangeable back straps, reversible magazine catch and the dual recoil spring system. Fixed sights.

 

GLK Gen4 Glock 22 .40 Smith & Wesson 4.49 Inch Barrel Tenifer Finish Fixed Sights 15 Round

Glock 22 Gen4

Features fixed sights, interchangeable backstrap, revisable magazine catch and Dual recoil spring. Safe Action trigger system with three safeties. Right hand, hexagonal barrel rifling. Tenifer surface treatment process for barrel and slide.

 

GLK Gen4 Glock 23 .40 Smith & Wesson 4 Inch Barrel Tenifer Finish Fixed Sights 13 Round.

Features fixed sights, interchangeable backstrap, revisable magazine catch and Dual recoil spring. Safe Action trigger system with three safeties. Right hand, hexagonal barrel rifling. Tenifer surface treatment process for barrel and slide.

GLK Glock 26 Gen4 9mm 3.47 Inch Barrel Black Finish Fixed Sights 10 Round

Glock 26 Gen4

Concealable, self defense weapon with six inch slide and height of three inches. Fixed sights. Multiple back strap design. Gen4 Rough Textured frame. Dual recoil assembly. Reversible magazine catch. Glock accessory rail.

 

GLK Gen4 Glock 27 .40 Smith & Wesson 3.47 Inch Barrel Black Finish Fixed Sights 9 Round

Glock 27 Gen4

Features fixed sights, interchangeable backstrap, revisable magazine catch and Dual recoil spring. Safe Action trigger system with three safeties. Right hand, hexagonal barrel rifling. Tenifer surface treatment process for barrel and slide.

 

GLOCK INC Gen 4

Glock PG3430103 G34 Gen 4 DA 9mm 5.31" 17+1 AS Poly Grip/Frame Black

The Glock 34 Gen4, in 9x19, introduces revolutionary design changes to the
"Tactical/Practical" Glock designed to be the same overall length as the
Government Model 1911 pistols. Internally, the Glock dual recoil spring
assembly substantially increases the life of the system. A reversible
enlarged magazine catch, changeable in seconds, accommodates left or
right-handed operators. The surface of the frame employs the scientifically
designed, real-world-tested, Gen4 rough textured technology. The modular
backstrap design lets you instantly customize its grip to adapt to an
individual shooter's hand size.

GLK Glock 36 .45 ACP 3.78 Inch Barrel Black Finish Fixed Sights 6 Round

Glock 36

Slim and powerful - with the new Glock Slimline we present grip ergonomics of the next dimension. Fixed sights.

 

HKI USP40 Variant One .40 Smith & Wesson 4.25 Inch Barrel Black Finish 13 Round

Universal Self-Loading Pistol - Variant 1

Uses a modified Browning type action with special patented recoil reduction system. Built to take powerful +P and +P+ loads. Recoil reduction system reduces recoil effects on pistol components and lowers recoil forces felt by shooter. Features polymer frame and integral grips, 3-dot sights, extra large trigger guard, extended slide release and ambidextrous magazine release.

 

HKI USP9 Variant One 9mm 4.25 Inch Barrel Black Finish 15 Round

Universal Self-Loading Pistol - Variant 1

Uses a modified Browning type action with special patented recoil reduction system. Built to take powerful +P and +P+ loads. Recoil reduction system reduces recoil effects on pistol components and lowers recoil forces felt by shooter. Features polymer frame and integral grips, 3-dot sights, extra large trigger guard, extended slide release and ambidextrous magazine release.

 

H&K VP9 9mm 4.09 Inch Barrel 3-Dot Sights Black Finish Rail 15 Round.

Striker fired. Ergonomic grip design that includes three changeable backstraps and six side panels for customization. Molded finger grooves in the front of grip. Slide release and magazine release are ambidextrous. Utilizes the P30 steel magazine. Equipped with extended picatinny Mil-Std-1913 rail molded into its polymer frame. Cold hammer-forged steel barrel. Polygonal bore profile. Machined steel slide. Three-dot sight system. 5.4 pound trigger pull. Includes two magazines.

Introduced in 2012, the Micro .380 ACP set the bar for the highest quality firearm in its class. This year the Micro 9 Stainless joins its ranks, offering the same highly sought-after small-scale 1911 ergonomics, a single action trigger, superior safety features and all-metal construction.
The Micro 9 barrel and slide is machined from stainless steel for superior resistance to moisture, while the frame is shaped from the finest aluminum for integrity and strength. One of the most important Micro design advantages is a single action trigger with a short, smooth pull that ensures accuracy and confidence. The thumb safety, slide release and magazine release are pure 1911 in design. Other standard features include a lowered and flared ejection port for flawless ejection and a beveled magazine well for fast, positive loading. Sights are steel —not plastic— and mounted in machined dovetails for additional durability.
Ideal for any shooter, the Micro 9 will set a new level of expected quality and shootability to the 9mm micro-compact for concealed carry, everyday carry and home protection.

KSV Vector Gen II SDP SB With Stabilizing Brace 9mm 5.5 Inch Threaded Barrel Black 17 Round

Super V Recoil Mitigation System. Unique operating system redirects energy down and away from the shooter which eliminates felt recoil and muzzle climb. Toolless caliber interchangeability. Glock magazine compatible. Ergonomic with a redesigned trigger, a short throw ambidextrous safety lever and a more comfortable pistol grip. Features a short, threaded, 5.5 inch threaded barrel. Rear quick detach sling point assists with carrying the firearm. Standard equipment on the Vector SDP are the Magpul MBUS sights, full length picatinny top rail and a Glock Magazine. Includes SBT stabilizing brace.

Lower: PSA 9mm Billet Complete Magpul Orgional Equipment (MOE) Lower designed to use Glock®-style magazines with Mil-spec Matte Finish.  

Barrel: This Chrome Moly vanadium 4150V barrel is chambered in 9mm (9x19)  with a 1:10" twist.  It is Nitride coated for accuracy and durability, and is finished off with a . PSA 13.5" anodized M-Lok free float rail, and an A2 Style Birdcage Flash Hider.
Upper: The forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. These uppers are made for us right here in the USA by a mil-spec manufacturer.
Bolt Carrier Group: For 9mm AR15.   Phosphate coated, 8620 steel, G-9 Hybrid Bolt allows use with either Glock®;-style, or Colt®-style magazine, Palmetto State Armory Lowers. 

 

RUGER  Model 10/22 Carbine .22 Long Rifle 18.5 Inch Barrel New Black Matte Finish Hardwood Stock 10 Round

Model 10/22 Standard Carbine

With American hardwood stock. Gold bead front sight and folding rear sight. Includes a combination .22 tip-off and Weaver-type scope base adapter.

 

Ruger American Pistol 9mm 4.2 Inch Stainless Steel Barrel Black Nitride Slide Novak 3-Dot Sights Accessory Rail Black Grips 17 Round.

Pre-tensioned striker system action. Features include short takeup trigger with positive reset; recoil-reducing barrel cam, low mass slide, low center of gravity and low bore axis; +P tested. Includes genuine Novak LoMount 3-dot sights, ambidextrous slide stop and magazine release. Modular wrap-around grip system for adjusting palm swell and trigger reach. One-piece, high performance glass filled nylon grip frame. Stainless steel barrel. Stainless steel slide with black Nitride finish. Mil-Std-1913 picatinny rail. Two Nickel-Teflon plated steel magazines. Recessed lanyard attachment point. Internal, automatic sear block system safety; integrated trigger safety; no trigger pull required for takedown.

 

Ruger  Model GP-141 .357 Magnum 4.2 Inch Full Shroud Barrel Blue Finish Adjustable Sights 6 Round

GP100

Recoil-reducing, cushioned, rubberized black Hogue Monogrip. Transfer bar operating mechanism with triple locking cylinder. Grip frame design easily accommodates custom grips. Easy takedown. Heavy full-shrouded precision-rifled barrel. Ramp front sight. 

 

Ruger  LC380 .380ACP 3.12 Inch Barrel All Black 3-Dot Adjustable Sights 7 Round

LC380

High performance glass-filled nylon black frame with blued alloy steel slide and barrel. 1:10 inch right hand twist. Six grooves. Adjustable 3-dot sights. Seven round magazine. Overall length 6 inches. Width is .90 inches.

 

 

Ruger LC9S Striker-Fired Compact 9mm 3.12 Inch Blued Barrel Adjustable 3-Dot Sights Black 7 Round

Striker-fired version of the LC9 with a short, light trigger. Slim, lightweight and compact design. Blued alloy steel slide and black, one-piece glass-filled nylon grip frame. Checkered grip frame. Dovetailed, high-visibility 3-dot sight system with windage adjustable rear sight and fixed front sight. Blued, alloy steel barrel with 1:10 inch right hand twist. Includes integrated trigger safety, manual safety, magazine disconnect. One 7-round magazine and soft case included.

 

 

RUG LCP .380 ACP Caliber 2.75 Inch Barrel Blue Finish 6 Round

 

With blued through-hardened steel slide and black, high-performance, glass-filled nylon grip frame. Fixed front and rear sights are integral to the slide while the hammer is recessed within the slide. Included finger grip extension floorplate can be added to the magazine for comfort and grip.

 

RUG LCPII .380 ACP 2.75 Inch Barrel Blue Finish Integral Sights Black Frame And Slide 6 Round. Compact design for conceal carry. Rugged construction with through-hardened steel slide and black one-piece high performance glass-filled nylon grip frame. Textured grip frame. Short, crisp, single-action trigger. Includes finger grip extension floorplate that can be added to the magazine for comfort and grip. Fixed front and rear sights are integral to the slide, while the hammer is recessed within the slide. Easy-to-rack slide designed to hold open after last round ejection. Blued, alloy steel barrel. Includes pocket holster and one 6-round magazine. Weighs just 10.6 ounces. NOTE: 6-round LCP magazines are compatible with the LCPII but will not activate the last round hold-open feature. 7-round LCP magazine are NOT compatible with the LCPII.

Ruger Model LCR-22 Lightweight Compact Revolver .22 Long Rifle 1.875 Inch Barrel Matte Black Finish Hogue Tamer Monogrip 8 Rounds

Model LCR-22

Lightweight compact rimfire revolver built on a monolithic frame made of aerospace grade aluminum. Friction reducing cam. Polymer fire control housing. Grip peg allows for a variety of grips to be installed. Hogue Tamer Monogrip. High-strength stainless steel cylinder, fluted and treated with Ionback Diamondback finish. Stainless steel barrel. Replaceable pinned ramp front sight and U-Notch integral rear sight.

 

RUGER  Model LCRX .38 SPL+P 1.875 Inch Barrel Replaceable Pinned Ramp Front and U-Notch Integral Rear Sights Matte Black Aluminum Frame External Hammer 5 Round

 

External hammer for single or double-action use. Monolithic frame is made from aerospace-grade, 7000 series aluminum. Patented Ruger friction reducing cam is a next generation design in fire control systems that results in a smooth non-stacking trigger pull. Patent-pending polymer fire control housing holds all the fire control components in their proper dimensional relationships, reduces weight significantly and helps reduce recoil. High-strength stainless steel cylinder is extensively fluted (reducing weight) and features an Ionbond DiamondBlack finish. Hogue Tamer Monogrip reduces perceived recoil. Grip peg allows for a variety of grip styles to be installed.

 

 

Ruger Model LCRX .38 SPL+P 1.875 Inch Barrel Replaceable Pinned Ramp Front and U-Notch Integral Rear Sights Matte Black Aluminum Frame External Hammer 5 Round.

External hammer for single or double-action use. Monolithic frame is made from aerospace-grade, 7000 series aluminum. Patented Ruger friction reducing cam is a next generation design in fire control systems that results in a smooth non-stacking trigger pull. Patent-pending polymer fire control housing holds all the fire control components in their proper dimensional relationships, reduces weight significantly and helps reduce recoil. High-strength stainless steel cylinder is extensively fluted (reducing weight). Hogue Tamer Monogrip reduces perceived recoil. Grip peg allows for a variety of grip styles to be installed. 

Ruger SP101 Model KSP-242-8 .22 Long Rifle 4.2 Inch Satin Stainless Barrel Adjustable Rear Sight Fiber Optic Sight 8 Round

SP101

Grip frame design to easily accommodate custom grips. Features floating firing pin mounted in the frame, transfer-bar safety, and triple locking cylinder. Cushioned black rubber grip with insert. Satin stainless finish.

 

RUG Model KSP331X .357 Magnum 3.06 Inch Barrel Satin Stainless Finish Fixed Rear Sight 5 Round

SP101

Grip frame design to easily accommodate custom grips. Features floating firing pin mounted in the frame, transfer-bar safety, and triple locking cylinder. Cushioned black rubber grip with insert. Satin stainless finish.

 

Ruger  SR1911 .45 ACP 4.25 Inch Barrel Low Glare Stainless Steel Finish One 7 Round and One 8 Round Magazine

SR1911 Pistol

Original 1911 Series 70 design. Hardwood grips and checkered backstrap. CNC machined. Stainless steel barrel and bushing are produced from the same bar stock on the same machine for improved accuracy. Positive barrel lock-up. Oversized ejection port and extended magazine release. Lightweight aluminum skeletonized trigger features an adjustable over-travel stop. Dovetailed 3-dot sight system features a Novak LoMount Carry rear and standard front sight. Includes titanium firing pin, one 7-round and one 8-round stainless steel magazine, bushing wrench and soft case.

 

Ruger SR22PB .22 Long Rifle 3.5 Inch Stainless Steel Barrel Silver Aluminum Slide Black Polymer Frame 3-Dot Sight System Ambidextrous Safety/Magazine Release 10 Round Includes Soft Case

SR22 Polymer

Built on a black polymer frame, aluminum slide with serrations and black anodized finish. Fixed white dot front sight and adjustable rear sight. Reversible blade allows selection of two white dots or black blade. Picatinny rail with multiple cross slots on underside of frame. Two interchangeable rubberized grips with serrations (no tools required to change). Ambidextrous manual safety, decocking lever and magazine release. Includes two 10-round magazines, two finger grip extension floorplates and soft case.

 

 

Ruger SR40C Compact .40 Smith & Wesson 3.5 Inch Barrel Brushed Stainless Steel Slide 15 Round

SR40C Compact Pistol

Custom slide design reduces recoil and slide velocity. Unique reversible backstrap (flat or arched). Integral accessory mounting rail. High-visibility 3-dot sight system features a raked-forward front sight for easy removal from the holster. Rear sight is windage and elevation adjustable. Ambidextrous thumb safety and d-shaped magazine release. Hard plastic case. Overall length is 6.85 inches, width is 1.27 inches and weight is 23.4 ounces. 3.5 inch barrel. 1:16 inch right hand twist, 6 grooves.

 

Ruger SR9C Compact 9mm 3.5 Inch Brushed Stainless Barrel Adjustable Sights Reversible Backstrap Ambidextrous Safety Built-In Rail And One 17 Round Magazine and One 10 Round Magazine

SR9C Brushed Stainless Compact Pistol

Features a raked forward front sight for easy removal from the holster. Rear sight is windage and elevation adjustable and front sight is windage adjustable. Reversible backstrap is adjustable for a flat or arched fit. Ambidextrous thumb safety and D-shaped ambidextrous magazine release are easy to reach and actuate. Built-in accessory mounting rail. Retraction grooves on the front of the slide provide a sure grip. Comes with two magazines.

 

 

Ruger Super Redhawk Alaskan .44 Remington Magnum 2.5 Inch Barrel Satin Stainless Steel Finish 6 Round

 

Strong extended frame has extra metal in top strap, sidewalls and barrel mounting areas. Patented single spring mechanism for both hammer and trigger. Triple locking cylinder. Black Hogue Tamer Monogrip helps cushion recoil. Ramp front and adjustable rear sights. Hammer forged barrel. Satin stainless finish. Includes hard plastic case. No rings.

 

S&W Model 351PD AirLite .22 Magnum 1.875 Inch Barrel Matte Black Finish Wood Grip Internal Lock 7 Round

Model 351PD AirLite Sc

Single action/double action. Small J-frame. Light Gathering HIVIZ fiber optic orange dot front sight and fixed rear sight. Wood finger groove grip. Aluminum alloy frame and cylinder. Non-reflective matte finish. Internal lock. Weight 10.8 ounces.

 

S&W Model 629 .44 Magnum 6 Inch Barrel Satin Stainless Finish Adjustable Sight Internal Lock 6 Round

Model 629

Single action, double action. N-Large frame. Six round capacity. .500 inch target hammer. .400 inch smooth target trigger. Red ramp front sight. Adjustable white outline rear sight. Hogue rubber combat grips. Stainless steel material. Satin finish.

 

S&W Model 642 Airweight .38+P Smith & Wesson 1.875 Inch Stainless Barrel No Internal Lock Fixed Sight Rubber Grips 5 Round

Model 642 Airweight - No Internal Lock

Double action only. Small J-frame. Alloy frame material. Internal hammer. No internal lock. Five round capacity. Front integral sight. Fixed rear sight. Stainless finish on a 1.875 inch barrel.

 

S&W Model 686 .357 Magnum/.38 Special +P 6 Inch Barrel Satin Stainless Finish Adjustable Sight Internal Lock 6 Round.

Single action/double action. L-Medium frame. Exposed hammer. Six round capacity. Full lug barrel. .375 inch target hammer. .312 inch smooth target trigger. Red ramp front sight. Adjustable white outline rear sight. Hogue rubber/SB conversion grips. Stainless steel frame and cylinder. Satin finish.

Smith & Wesson M&P Bodyguard .380 ACP 2.75 Inch Barrel Matte Black Finish Polymer Frame Manual Thumb Safety 6 Round.

Double action only - hammer fired. Stainless steel drift adjustable front and rear sights. Slide and barrel are stainless steel. Polymer frame. External takedown lever and slide stop. Ergonomic grip. Includes two magazines; one with finger grooves, one flat fit.

S&W Bodyguard 38 With Integrated Insight Laser .38+P Smith & Wesson 1.9 Inch Barrel Black Finish Black Grip 5 Round

Bodyguard 38 Integrated Insight Laser

Double action only. Black ramp front sight. Integral rear sight. Aluminum Alloy upper frame material. Steel reinforced polymer lower frame material. Stainless steel with PVD coating cylinder material. Ambidextrous cylinder release.

 

S&W Governor .410 Gauge/.45 Colt/.45 ACP 2.75 Inch Barrel Matte Black Finish Synthetic Grip Six Rounds Any Combination Of Calibers

Governor

Single action/double action. Heat treated scandium alloy frame, stainless PVD cylinder. Tritium night front sight, dovetailed. Fixed rear sight. Grips are made of two panels and are held together with a single hex-head screw with material covering the backstrap of the revolver to absorb more recoil. 2.75 inch barrel. Matte black finish. Holds six rounds of .410 2.5 inch shotshells, .45 ACP, or .45 Colt in any combination. Overall length is 8.5 inches.

 

S&W M&P 15 Tactical Rifle 5.56mm NATO 16 Inch Barrel 6-Position Telescopic Stock Adjustable Dual Aperature Rear Sight 30 Round

M&P 15 Tactical Rifle

Gas operated semi automatic. Six position telescopic stock. Thermo-Set M4 handguard. 1 in 9 inch twist. 7075 T6 aluminum upper/lower material. 4140 steel barrel material. Chromed components: barrel bore, gas key and bolt carrier. Hard coat black anodized receiver and barrel. Adjustable post front sight. Adjustable dual aperature rear sight.

 

S&W M&P 15-22 Tactical .22 Long Rifle 16 Inch Barrel 6-Position Collapsible Stock Black Finish A2 Pistol Grip 25 Rounds

M&P 15-22 Tactical Rifle

Dedicated .22LR platform. Lightweight high strength polymer upper and lower receivers. Removable 25 round magazine. Adjustable front and rear sights. AR15/M4 style features and controls. A3 style flat top upper receiver. Quad rail handguard accepts all 1913 Mil. Std. rail adaptable accessories. A2 pistol grip - receiver will accept most standard after-market AR15 pistol grips. Six position collapsible stock - receiver extension accepts Mil-Spec carbine stocks. Functioning charging handle. Two position receiver mounted safety. Bolt holds open on empty.

 

 

S&W Model M&P22 .22 Long Rifle 4.1 Inch Threaded Barrel Blue Finish Adjustable Rear Sight Polymer Frame 12 Round

Model M&P22

Single action semi-automatic. Features include rear adjustable sights, front black blade sights and plastic grip. Polymer frame. Ambidextrous slide stop. Reversible magazine release. Two-tone finish.

 

Model M&P 22 Compact

Compact frame. Single action (internal hammer). White dot front sight. White 2-dot rear sight is screw adjustable for windage and elevation. Polymer grip. Carbon steel barrel. Aluminum alloy slide. Polymer frame. Black hard coat anodize finish. Reduced scale version of the full-size M&P pistol. Threaded (3/8 inch-24) barrel takes 3/8 inch x 24 to 1/2 inch x 28 adapter (part number 3002050, not included). 2 Magazines included. Ambidextrous manual safety. Reversible magazine release. Picatinny style accessory rail. Magazine safety - will not fire without magazine inserted. Internal lock. Captured recoil guide rod and spring for easier assembly/disassembly. Made in USA.

 

 

S&W Military & Police .40 Smith & Wesson 4.25 Inch Barrel Black Melonite Finish Without Magazine Safety 15 Round

 

Melonite finish, Polymer full size frame, stainless Melonite slide, stainless steel barrel, Novak Lo Mount carry rear sight, dot front sight, double action only with plastic grips.

 

S&W M&P Compact .40 S&W 3.5 Inch Barrel Ambidextrous Manual Safety Plastic Grips Black 10 Round

Striker fire action. White Dot Dovetail front sight, steel low profile carry rear sight. Three interchangeable palmswell grip sizes. Polymer frame. Stainless steel barrel and slide. Black corrosion resistant slide finish.

SMITH & WESSON

 

M&P Full Size .45 ACP 4.5 Inch Barrel Dark Earth Finish White Dot Sights Manual Safety 10 Round

 

Double action. Polymer frame, stainless steel barrel and slide construction. Includes universal Picatinny-Style equipment rail, ambidextrous slide stop and reversible magazine catch. Three interchangeable palmswell grip sizes. White dot front sight and low profile carry rear sight.

 

S&W M&P Compact .45 ACP 4 Inch Barrel Ambidextrous Manual Safety Plastic Grips Black 8 Round.

Striker fire action. White Dot Dovetail front sight, steel low profile carry rear sight. Three interchangeable palmswell grip sizes. Polymer frame. Stainless steel barrel and slide. Black corrosion resistant slide finish.

 

S&W Military & Police 9mm 4.25 Inch Barrel Black Melonite Finish Without Magazine Safety 17 Round

 

Melonite finish, Polymer full size frame, stainless Melonite slide, stainless steel barrel, Novak Lo Mount carry rear sight, dot front sight, double action only with plastic grips.

 

Smith & Wesson M&P9 M2.0 Striker Fire 9mm 4.25 Inch Barrel Black Armornite Finish White Dot Sights Polymer Frame/Grips 17 Round.

Striker fire action. Full size polymer frame. Stainless steel barrel and slide with Armornite finish. Crisp M&P M2.0 crisp trigger with lighter trigger pull. Tactile and audible trigger reset. Interchangeable palmswell grip inserts for optimal hand fit and trigger reach. High grip to barrel axis. Polymer grips with aggressive texturing. No magazine safety. White dot front sight; low mount white two dot rear sight.

S&W M&P 9 Performance Center 9mm 5 Inch Ported Barrel and Slide Black Finish 17 Rounds. Striker Fire (double action). White dot dovetail front sight. Fixed 2-dot rear sight. Polymer grip and frame. Black durable corrosion resistant finish. Ported barrel and slide to reduce muzzle flip. Adjustable trigger stop to stop trigger over travel. Three interchangeable, newly-enhanced, textured palmswell grip sizes for better control and fit. C.O.R.E. Competition Optics Ready includes optics mounting kit. Slide cut to accept the following optics: Trijicon RMR, Leupold Delta Point, Jpoint, Doctor, C-More STS and Insight MRDS. Enhanced trigger and Performance Center sear.

S&W M&P Shield .40 Smith & Wesson 3.1 Inch Barrel Black Melonite Finish Polymer Frame One 6 Round and One 7 Round Magazine

Model M&P Shield

Extremely thin and lightweight design means that it can be comfortably carried all day. Single-sided thumb safety and slide stop maximize slimness. M&P s patented take down lever and sear deactivation system allows for disassembly without pulling the trigger. Includes 2 magazines; 1 with extended capacity for full grip. 18 degree grip angle for natural point of aim. Striker-fired for short and consistent trigger pull every time. White dot front sight, white 2 dot rear sight. Stainless steel barrel and slide with polymer frame. Black Melonite 68 HRc barrel/slide finish.

 

 

Smith & Wesson Model M&P Shield

Extremely thin and lightweight design means that it can be comfortably carried all day. Single-sided thumb safety and slide stop maximize slimness. M&P s patented take down lever and sear deactivation system allows for disassembly without pulling the trigger.  18 degree grip angle for natural point of aim. Striker-fired for short and consistent trigger pull every time. White dot front sight, white 2 dot rear sight. Stainless steel barrel and slide with polymer frame. Black Melonite 68 HRc barrel/slide finish.

 

 

S&W Military & Police Compact 9mm 3.5 Inch Barrel Melonite Finish Ambidextrous Manual Safety Plastic Grips 12 Round

 

Striker Fire Action. White Dot Dovetail front sight, steel low profile carry rear sight. Three interchangeable Palmswell Grip Sizes. Polymer Frame/Stainless Steel barrel and slide. Black Melonite finish. Thumb safety.

 

 
S&W Model 686 Plus .357 Magnum/.38 Smith & Wesson Special +P 4 Inch Barrel Satin Stainless Finish Adjustable Sight Internal Lock 7
Round Model 686 Plus
Single action, double action. L-Medium frame. Seven round capacity. Full lug barrel. .375 target hammer. .312 smooth target trigger. Red ramp front sight. Adjustable white outline rear sight. Hogue rubber/SB conversion grips. Stainless steel frame and cylinder. Satin finish.

S&W Performance Center SW1911 Custom .45 ACP 5 Inch Stainless Steel Throated Barrel Glassbead Finish G10 Custom Wood Grip 8 Round. Large frame. Single action. Stainless steel frame with stainless steel slide. G10 custom wood grips. Competition speed configuration hammer. Competition match with overtravel stop trigger. 3.5-4 pound trigger pull. Throated barrel; precision crowned muzzle. Briley spherical barrel bushing. Polished feed ramp. Black post front sight. Adjustable rear sight. Grip and frame mounted ambidextrous external safety. Made in the USA

S&W Model SD9 VE 9mm 4 Inch Barrel Two-Tone Finish 3-Dot Sights Self Defense Trigger 16 Round. SDT- Self Defense Trigger for optimal consistent pull first round to last. Striker fired action. Stainless steel barrel and slide. Standard Picatinny style rail. Polymer frame. Slim ergonomic textured grip with aggressive front and back strap texturing. Textured finger locator.

S&W M&P Shield Ported 9mm 3.1 Inch Ported Barrel Black Melonite Finish Black Ported Slide Polymer Frame Hi-Viz Sights 7/8 Round Magazines.

Extremely thin and lightweight design for comfortable carry. 18 degree grip angle for natural point of aim. Striker-fire action. Polymer frame and grip. Hi-Viz fiber optic green front sight; Hi-Viz fiber optic red rear sight. Stainless steel ported slide with black finish. Stainless steel ported barrel with black 68HRc finish. Enhanced trigger. Includes one flat magazine and one extended magazine with finger groove. Made in the USA.

S&W Model SW22 Victory 22LR 5.5 Inch Stainless Steel Frame Stainless Steel Finish 10 Round.  Adjustable fiber optic sights. Interchangeable barrel for accuracy. One-screw takedown. Two 10- round magazines. Stainless steel frame. Additional picatinny-style rail used for mounting optics or other equipment.

 

Sig Sauer 1911 Ultra Compact .45 ACP 3.3 Inch Barrel Low Profile Night Sights Two-Tone Finish Blackwood Grips 7 Round

 

Single action only. Alloy frame with black hard anodized finish. Natural stainless steel slide finish. Low profile Siglite night sights. Custom blackwood grips. Checkered front strap. Beavertail grip safety. Three-hole trigger.

 

The 1911-22 is built to the same dimensions as the full-sized 1911 pistol. It features a lightweight metal frame and slide, low-profile three-dot sights, working grip safety and ambidextrous thumb safety, making the 1911-22 a perfect training tool for 1911 fans as well as a fun plinking pistol for all ages. 
 
 

Sig Sauer 229 Extreme
P229R Extreme railed gun with Nitron coated stainless steel slide and forward cocking serrations; double action/single action short reset trigger; Hogue black and gray G10 Piranha grips and a 3.9 inch barrel with Siglite night sights

SIG P238 .380ACP 2.7 Inch Barrel Siglite Night Sights Black Nitron Finish Polymer Grips 6 Round.  Single action only. Subcompact frame. Built on an anodized alloy beavertail style frame with fluted grips. Stainless steel slide with slide serrations. Removable and wind adjustable Siglite night sights. Ships with a lockable hard case and one six-round magazine.

Sig Sauer P290RS Extreme
P290RS Enhanced Re-Strike in 9mm only with Nitron coated stainless steel slide, 2.9 inch barrel with Siglite night sights; light double action only trigger; Hogue black and gray G10 Piranha grips inserts

 

Sig Sauer  P320 Compact Striker 9mm 3.9 Inch Barrel Siglite Night Sights Black Nitron Slide Finish 15 Round

 

Striker-fired double action only. Disconnect safety. 3-point take down safety system. Takedown is prohibited without removal of magazine and without slide locked to rear. Stainless steel compact frame, Nitron slide finish and 1913 picatinny accessory rail. Interchangeable polymer grips; medium polymer grip module

 

 

SIG SAUER  P938 9mm 3 Inch Barrel Siglite Night Sights Black Nitron Finish Black Rubber Grips 6 Round

Single action only. Features a Nitron coated stainless steel slide and a hard anodized alloy beavertail-style frame. Siglite night sights and ambidextrous safety.

 

SIG SP2022 .40 S&W 3.9 Inch Barrel Contrast Sights Black Nitron Slide Finish Black Polymer Grips 12 Round. Double action/single action. Lightweight, wear-resistant polymer frame with integrated accessory rail. Four-point safety system. Polymer grips. Slide is machined from a solid block of stainless steel and protected by a Nitron finish.

The K-Frame revolver is one of the most important innovations in Smith & Wesson history and was built specifically to handle the .38 S&W Special cartridge. Since its introduction in 1899, the K-Frame has been a favorite for military and police professionals as well as target shooters and enthusiasts. 
 

Smith & Wesson J-Frame revolvers have had your back since 1950.  These small revolvers were designed to fire a full power round and are as simple and easy to use as they are reliable.  Available in various calibers and with three diverse hammer designs, it is no surprise that the Smith & Wesson J-Frame has become the most popular, small-frame, defense revolver on the market.
The Model 637 is a variation of the Model 37 Chiefs Special Airweight® that integrates the time-tested features of the original with modern advancements.  This ultra-light revolver is a favorite back-up and concealed carry firearm.
Features
• Lightweight alloy frame for easy carry
• Stainless steel barrel and cylinder
• External hammer
• Rated for continuous +P Use

Springfield 1911-A1 Enhanced Micro Pistol
Enhanced Micro Pistol is the first 1911 production made from the ground up to shoot short cartridges. Stainless steel slide with anodized matte blue frame. Wood grips with Springfield crossed cannon emblem. Slimmed grip to fit the single stack 9mm magazine. Novak tritium sights.

SAI Model 1911 EMP Compact 9mm 3 Inch Stainless Steel Barrel Tritium Night Sight Stainless Steel Slide Satin Finish Aluminum Alloy Frame Cocobolo Grips 9 Round.  Stainless steel match grade bull barrel, fully supported ramp. Low profile combat 3-dot Tritium night sight. Skeletonized trigger. Forged stainless steel slide with satin finish. Forged aluminum alloy frame with black hardcoat anodized finish. Dual spring with full length guide rod recoil system. 1.12 inch Thinline Cross Cannon Double Diamond Cocobolo grips. Includes three blued magazines with slam pads.

Springfield XD .40 Smith & Wesson 4 Inch Barrel OD Green Finish 12 Round

 

Lightweight, ultra high-impact poly frame. Over-sized heat treated slide rails. Dual tension recoil spring system. Over-sized slide stop/release. USA trigger system. Over-sized take-down release lever. Forged, heat treated fully machined slide. Cold hammer forged barrel. Ambidextrous magazine release. Loaded chamber indicator. Front and rear cocking serrations. Firing pin status indicator.

 

 

Springfield XD Mod.2 Sub-Compact .45ACP 3 Inch Barrel Black One 9 Round and One 13 Round with X-Tension

 

GripZone is a set of frame features working in unison to optimize interaction between the human hand and the pistol. Within the GripZone there are three distinct textures each engineered for a specific purpose. Re-contoured slimmer frame and slide add up to a far more natural grip feel that has nearly twice the magazine capacity and is only 2 tenths of an inch thicker than single stack conceal carry models. High-Hand grip relief and High-Hand beavertail enable the hand to be positioned as high as possible toward the barrel bore thereby greatly reducing the pistol s felt recoil. No-snag trigger guard minimizes possible unintended contact with a holster or clothing. Dual spring with full length guide rod. Fiber optic front and low profile combat rear sights. Forged steel slide with Melonite finish. Hammer forged barrel. Black polymer frame.

 

Springfield Armory®, the same company that brought Point & Shoot Ergonomics™ to the market in 2001 is proud to announce the latest evolution of the polymer pistol – The XD® Mod.2® Sub-Compact in 9mm and .40SW.
Put an XD® Mod.2® in your hand, and you’ll feel the difference. Equipped with the GripZone®, the XD® Mod.2® Sub-Compact applies ergonomic science to every surface that touches your hand.
Enter the GripZone®: a set of frame features working in unison to optimize interaction between the human hand and the pistol. Within the GripZone®, there are three distinct textures, each engineered for a specific purpose.
The GripZone® doesn’t stop with new grip textures. The re-contoured, slimmer frame and slide add up to a far more natural grip feel that has nearly twice the magazine capacity and is only 2 tenths of an inch thicker than single stack conceal carry models. The High-Hand™ grip relief and High-Hand™ beavertail enable the hand to be positioned as high as possible toward the barrel bore thereby greatly reducing the pistol’s felt recoil. The no-snag trigger guard minimizes possible unintended contact with a holster or clothing. All of these GripZone® advantages are ergonomic features that you will truly feel. It all adds up to a pistol that naturally and comfortably stays positioned in your hand.
If you are looking for the best solution to shooting comfort, concealability and increased magazine capacity, you’ll want to pick up the new XD® Mod.2® Sub-Compact.

 
 

Springfield Armory®, the same company that brought Point & Shoot Ergonomics™ to the market in 2001 is proud to announce the latest evolution of the polymer pistol – The XD® Mod.2® Sub-Compact in 9mm and .40SW.
Put an XD® Mod.2® in your hand, and you’ll feel the difference. Equipped with the GripZone®, the XD® Mod.2® Sub-Compact applies ergonomic science to every surface that touches your hand.
Enter the GripZone®: a set of frame features working in unison to optimize interaction between the human hand and the pistol. Within the GripZone®, there are three distinct textures, each engineered for a specific purpose.
The GripZone® doesn’t stop with new grip textures. The re-contoured, slimmer frame and slide add up to a far more natural grip feel that has nearly twice the magazine capacity and is only 2 tenths of an inch thicker than single stack conceal carry models. The High-Hand™ grip relief and High-Hand™ beavertail enable the hand to be positioned as high as possible toward the barrel bore thereby greatly reducing the pistol’s felt recoil. The no-snag trigger guard minimizes possible unintended contact with a holster or clothing. All of these GripZone® advantages are ergonomic features that you will truly feel. It all adds up to a pistol that naturally and comfortably stays positioned in your hand.
If you are looking for the best solution to shooting comfort, concealability and increased magazine capacity, you’ll want to pick up the new XD® Mod.2® Sub-Compact.

 
 

Springfield XDM 45ACP 4.5" Barrel
Modified Major Grasp slide serrations. Angle and depth of each contour in the grip has been calculated for maximized control vertically, horizontally and torsionally. Highest capacity polymer pistol in 45ACP with a capacity of 13 rounds. Mould-Tru Back straps, Match Grade Barrel, loaded chamber indicator and Minimal Error disassembly. Minimal reset trigger. Operation of the magazine release is easily accomplished by virtually any size hand without twisting or adjusting from the shooting grip. Triple-position Picatinney rail.

 

SAI XDM 9mm 4.5 Inch Match Grade Barrel 19 Round Black Finish With XDM Gear System

XDM Models

Contour frame. Deeper, longer and more slide serrations. Angle and depth of each contour in the grip has been calculated for maximized control vertically, horizontally and torsionally. Match grade barrel. Minimal reset trigger. Operation of the magazine release is easily accomplished by virtually any size hand without twisting or adjusting from the shooting grip. Triple-position Picatinny rail. Additional backstraps. Dovetail front and 3-dot steel rear sights. Polymer frame. All XDM pistols include XDM Gear System: belt holster, double magazine pouch, magazine loader, two magazines and a cable lock.

 

Share

 

 

How do you make the most concealable full-power pistol even better? Offer it in all major self-defense calibers, that’s how.
When the Springfield Armory® XD-S® arrived on the scene in 9MM and .45ACP , its svelte profile quickly made it the pistol to beat for concealed carry. The thin, single-stack design allows it to melt into the body when carried, yet it’s shockingly easy to control. Even those with larger hands can get most of three fingers on the grip.
Practice is everything, so rather than go for uncomfortably and uncontrollably small, we aimed to create a handgun that’s easy and pleasurable to shoot while still offering amazing concealment. You’ll enjoy your range time with the XD-S® and become a better shooter as a result.
For 2016, we’re introducing the XD-S® in the ever-popular .40SW , so you can choose the mix of power and capacity that makes you comfortable. Like the originals, the new XD-S® .40SW comes with both flush (six-round) and Mid-Mag (seven-round) magazines, so capacity of the new .40SW model sits right between that of the 9MM and .45ACP XD-S®.
We’ve designed the XD-S® to fit you – not the other way around. Interchangeable backstraps customize grip circumference. We even include matching magazine sleeves so the Mid-Mag (7 Round) fits seamlessly too. To make the XD-S® durable, yet portable, we used the right materials for the job. The black polymer frame saves weight while the forged stainless steel slide and Melonite® hammer forged barrel put strength where it’s needed most. The sights are designed for speed with a fiber-optic front sight that leaps into the sight picture. Don’t like the color? That’s OK , we include green and red tubes – take your pick. The rear combat-profile sight offers a simple notch so there are no distractions to divert attention from the front sight.
Put it in your holster, and you’ll find that it’s Noticeably Unnoticeable™.

 

SAI XDS Models .45ACP 3.3 Inch Barrel Black 5 Round

 

Features a slimmer single stack frame, single-position Picatinny rail, low profile sight, two interchangeable backstraps allow you to customize your grip. Modified contour of the grip also makes it possible for nearly any size hand to release the magazine without twisting or moving from your firing grasp. Ultra Safety Assurance (USA) Trigger System, loaded chamber indicator and grip safety. XD-S also has an enhanced secure grip texture. Short reset trigger. Maximum reach magazine release.

 

Springfield XDS Essential 9mm 3.3 Inch Barrel Double Action Only USA Trigger System Black Melonite Finish Slide Black Polymer Frame 7 and 8 Round.

Double action only (USA Trigger System). Dual spring with full length guide rod. Black polymer frame with enhanced grip texture. Front fiber optic sight, fixed dovetail rear sight. Loaded chamber indicator. Slim single stack frame. Single position picatinny rail. One flush fitting magazine and one Mag X-Tension. Lockable plastic case and cable lock and bore brush.

 

Walther  Model CCP 9x19mm Caliber 3.54 Inch Barrel Black Finish SoftCoil System Black Polymer Frame 8 Round

Concealed Carry Pistol is a single-stack 9mm handgun that uses a gas delayed blowback system that Walther calls the SoftCoil system. SoftCoil system significantly reduced recoil but maintains a recoil spring that is soft for easy manipulation of the slide. SoftCoil system reroutes gas pressures which allows for the light spring and uses a non-tilting barrel instead of a tilting barrel which is typical to a Browning-type system used in many modern handguns. Striker-fired pistol and it has a 5.5 pound trigger pull. Manual thumb safety. Black polymer frame. Slide serrations front and rear. Ambidextrous magazine release.

 

Walther Colt 1911 Gold Cup Pistol .22 LR 5 Inch Barrel Rubber Grips Black Finish 12 Round.

Competition configuration of the legendary Colt 1911 handgun. Blowback operation, single action 5.5 pound trigger, fully adjustable target rear sight, removable drift adjustable front sight, manual thumb safety, grip safety, disconnector, internal plus pinned ejector and M8x75mm muzzle thread.

Walther Model P22 Military .22 Long Rifle 3.42 Inch Threaded Barrel Military Green Finish With Black Slide 10 Round

 

Tactical style. Features low profile three-dot polymer sights, loaded chamber indicator, front and rear slide serrations. External slide stop, three safeties, paddle-style ambidextrous magazine release lever. Double/single action trigger with 11 pound pull for double action and 4 pound pull for single action. Ergonomic Walther grip, checkered trigger guard. Interchangeable backstraps. Picatinny accessory rail on top and bottom. Military green finish with black slide.

 

 

Walther  Model P99 AS 9mm 4 Inch Barrel Black Finish Anti-Stress Trigger Picatinny Rail 15 Round

 

Anti-stress trigger. Features low profile three-dot polymer combat sights, Tenifer coated slide and barrel, rear slide serrations. Manual decocker, slide stop and three safeties. Ergonomic Walther grip, paddle-style ambidextrous magazine release levers and checkered trigger guard. Picatinny accessory rail.

 

 

Walther  Model PPQ M2 .22 Long Rifle 4 Inch Barrel Black Finish Picatinny Rail Combat Sights 12 Round

 

Rimfire PPQ model with mil-std 1913 picatinny rail. Tenifer coated slide and barrel. Serrated trigger guard. Quick defense trigger. Ambidextrous magazine release button. Ergonomic Walther grip. Ambidextrous slide stop. Front and rear slide serrations.

 

Walther Model PPQ M2 .40 S&W 4.1 Inch Barrel Black Tenifer Finish Picatinny Rail 11 Round.  Low profile three-dot polymer combat sights. Mil-std 1913 picatinny rail. Tenifer coated slide and barrel. Serrated trigger guard. Quick defense trigger. Ambidextrous magazine release button. Ergonomic Walther grip. Ambidextrous slide stop. Front and rear slide serrations.

Walther Model PPQ M2 .45 ACP 4.25 Inch Barrel Black Tenifer Finish Adjustable Sights Picatinny Rail 12 Round. Low profile three-dot polymer combat sights. Mil-std 1913 picatinny rail. Tenifer coated slide and barrel. Serrated trigger guard. Quick defense trigger. Ambidextrous magazine release button. Ergonomic Walther grip. Ambidextrous slide stop. Front and rear slide serrations.

 

Walther Model PPQ M2 9mm 4 Inch Barrel Black Finish Picatinny Rail 15 Round

 

Low profile three-dot polymer combat sights. Mil-std 1913 picatinny rail. Tenifer coated slide and barrel. Serrated trigger guard. Quick defense trigger. Ambidextrous magazine release button. Ergonomic Walther grip. Ambidextrous slide stop. Front and rear slide serrations.

 

Walther  Model PPS 9mm 3.2 Inch Barrel Black Finish Picatinny Rail 6/7/8 Round

Model PPS

Slim, carry, polymer-frame design. Features low profile three-dot polymer combat sights, Tenifer coated slide and barrel, loaded chamber viewport. Rear slide serrations, red cocking indicator and slide stop. Ergonomic Walther grip, paddle-style ambidextrous magazine release levers. Light 6.1 pound trigger pull and compact accessory rail.

 

Century N-PAP Hi Cap Semi-Auto Rifle 7.62x39mm 16.25 Inch Barrel Black Finish Wood Buttstock/Handguard 30 Round. 

Hi capacity model of the N-PAP civilian rifle. Features a wood buttstock and handguard. Hammer forged barrel with 1:10 inch twist.